Kyoritsu Electric Clamp Meter for Current Measurement Cue Fork carrying 2300R AC/DC (with case)

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. AC/DC current measurement is possible with an open core type clamp sensor. True RMS value measurement is effective for distorted waveforms Check live wires with voltage sensing function One-touch zero adjustment for DC current range with zero adjustment function Data hold function (ACA/DCA only) ◆Low power consumption circuit for long battery life ◆Current measurement ・AC 0 to 100.0A ±2.0%rdg±5dgt (50/60Hz) ・DC 0 to ±100.0A ±2.0%rdg±5dgt ◆Crest factor (CF)*1: 2.5 ◆Voltage sensing function (NCV)*2 :NCV: Non-contact determination of the presence or absence of voltage (for both covered wires and bare wires) When a voltage of 80V or higher is detected, the “Hi” display flashes and the buzzer sounds intermittently ◆Measurement conductor diameter: max.φ10mm ◆Maximum display 1049 counts ◆Compliant standards IEC 61010-1 CAT.III 300V Pollution level 2 ◆Batteries used AAA batteries R03 (1.5V) x 2 (auto power off approx. 10 minutes) *Continuous use time ACA: approx. 46 hours DCA: approx. 52 hours ◆External dimensions 161 (L) x 40 (W) x 30 (D) mm ◆Weight approx. 110g (including batteries) ◆Accessories 9113 (carrying case) ŀ (tax included ŕ) AAA batteries R03 x 2, instruction manual *1 Crest factor (crest factor) The ratio of the peak value to the effective value, which indicates the width of the dynamic range. The crest factor is 1.41 for a sine wave with no waveform distortion. Any deviation from this value means that the waveform is distorted. * 2 Voltage sensing function (NCV: Non Contact Voltage) This function allows you to check the presence or absence of voltage without directly touching wires, electrodes, etc. (Easily and safely confirm the presence of AC voltage at cables, outlets, fuses, circuit breakers, switchboards, etc.)