Bullet Points:
1、Turn Signal Flasher Relay - The electronic turn signal flasher relay will fix LED-related turn signals indicator issues, such as a super-flickering, no-flickering, or bulb-off warning message on the dashboard lights, or just be used to replace.
2、Direct Replacement - The LED flasher relay can eliminate the use of load resistors and directly replace OEM 2-pin flasher relays, using LEDs or traditional bulbs to work at normal flash rates.
3、Speed Adjustable - The speed of the LED turn signal flasher relay is adjustable. Use a flat-blade screwdriver to adjust the bottom knob and to set its flash rate from 50 to 200 times per minute. Clockwise is to decrease speed and counterclockwise is to increase speed.
4、Compatible with - The LED flasher relay is compatible with most motorcycles. Easily plug in and easily use it. And it has 3 frequencies, counterclockwise for faster and clockwise for slower flash rate.
5、Advanced - Adopting advanced patch chip technology, the electronic turn signal flasher relay has short circuit automatic protection, overload automatic protection, and reverse connection automatic protection, which can make the light bulb work more stably.
installation tips:
1. When installing, be sure to align the pins correctly, the function of the flasher cannot be realized if the pins are installed wrongly.
2. If you change the flasher and the four lights come on together, you need to unplug the steering indicator of the dashboard.
3. B pin is input, L pin is output
4. B is connected to the positive pole of the power supply, L is connected to the positive pole of the lamp, and the negative pole of the lamp is grounded.
Specifications:
Name: Electronic Turn Signal Flasher Relay
Size: about 3.5x3.5x2.7cm / 1.38*1.38*1.06 inch
Voltage: 12V
Working voltage: 11V-15V
Switching Current: Min. 0.05A
Switching Load: Min. 0.6W
Flashing frequency: 50 to 200 times per minute
Operating temperature: -40°C to 80°C
Niet geleverd, dan geld terug
