A: Transmitter function description
1: Antenna
2: LOW/POWER bi-color indicator, low voltage/work and code pair indicator, the functions are as follows
●The green indicator light is always on: there is DC power supply or the battery power supply is normal;
●The red indicator light is always on: the battery is low when the power is turned on;
●The green indicator light is flashing: the code is in the state of the code; the received code indicator light is off after the code is correctly matched, at this time, short press the transmitting power/pair code button.
3: Charge charging indicator, the light is on when charging, and the light is off when fully charged or not connected to the battery
4: DC6V DC power input
5: Wet sensor wired urine wet sensor interface
●After detecting the child's bedwetting, there will be an alarm sound and LED light flashing indication, and the receiving will stop the alarm after the wetness is removed.
6: Microphone, pick up the sound signal of the transmitter
7: Power/Code power/code switch
●Short press to turn on/off
●Long press the pair code when the machine is turned off, the two-color light green light flashes
8: Temperature sensor, when the temperature of the transmitter exceeds 40 degrees or is lower than 0 degrees, the receiver will give an alarm and LED flashing indication
9: Battery door, built-in 3 AA batteries
B: Receiver product function description
1: Antenna
2: Power/Code: Power/Code switch
●Short press to turn on/off
●Long press the pair code when the machine is turned off, the two-color light green light flashes
3: Vibe vibration setting button, set the sensitivity of vibration alarm
4: A/B channel switch, which can switch transmitters of two different channels
5: Charge charging indicator, the light is on when charging, and the light is off when fully charged or not connected to the battery
6: DC6V DC power input
7: Two-color indicator light, normal work/code indication
●Green: long on, normal connection; flashing, in the code matching state, after the code is matched, the green light is off, and the red light is on. At this time, short press the power/matching button of the transmitter to successfully match the code, and the green light will turn into a long light.
●Red: cannot connect normally;
8, 9, 10, 11: 4-level volume and alarm indication function
When the urine wet alarm, the two lights 8 and 9 flash, and the alarm sound of “beep..beep..beep” will be issued every 4s.
When the temperature alarms, the three lights of 8, 9, and 10 flash, and the alarm sound of "beep..beep..beep" is issued every 4s.
12: Vibe ON/OFF vibration function on/off, turn on and off vibration alarm function
13: Two-color indicator light, battery low voltage indicator.
Green light: Indicates that the battery voltage is normal
Red light: Indicates that the battery voltage is too low or no battery is installed
14: VOL-: Volume down
15: VOL+: volume plus
16: Horn
17: Battery door, built-in 3 AA batteries
Niet geleverd, dan geld terug
