ATTENTION:
1.Micro SD card is not included.
2.According to regulations, we can only support retail for Russian customers. We are unable to ship bulk purchases from the same Russian customer. Thank you for your understanding.
Product package could contain different sets:
1.Flipper zero
2.Flipper zero+Wifi Devboard
3.Flipper zero+Protoboards
4.Flipper zero+Silicone case
5.Flipper zero+Screen Protector
6.Flipper zero+Wifi Devboard+Protoboards+Silicone case+Screen Protector
Our products come directly from the Flipper, and we promise that all the Flipper Zero and accessories we sell are brand new and genuine original.
Please, shoot on the video the moment of unpacking the goods, in case of the claims for quality and defects it will serve as an evidence.
FEATURES:
Flipper Zero is a portable multi-tool for engineers and geeks in a toy-like body. Flipper Zero loves researching radio protocols, access control systems, hardware, and more. It's fully open-source so you can adjust it to yourself in whatever way you like.
The idea of Flipper Zero is to combine all the hardware tools you'd need for exploration and development. Flipper was inspired by pwnagotchi project, but unlike other DIY boards, Flipper is convenience for everyday usage – it has a robust case, handy buttons, and shape.
There is an integrated 433MHz antenna in Flipper, and a CC1101 chip, which makes it a powerful transceiver capable of up to 50 meters range. Flipper uses 433 MHz to communicate with other Flippers. A 125 kHz antenna is located on the bottom of Flipper – it can read EM-4100 and HID Prox cards, save them to memory to emulate later. There is a built-in NFC module in Flipper Zero (13.56 MHz). Along with the 125kHz module, it turns Flipper into an ultimate RFID device operating in both Low Frequency (LF) and High Frequency (HF) ranges. The NFC module supports all the major standards. There is the built-in Bluetooth Low Energy module in Flipper Zero.
Full BLE support allows Flipper Zero to act as both a host and a peripheral device.
The infrared transmitter can transmit signals to control electronics such as TVs, air conditioners, stereo systems and others. There is the SD slot with a push-push type connector in Flipper, so the card will be reliably secured inside and won't stick out. Flipper Zero supports any FAT32 formatted microSD card to store your data.
Flipper Zero can be connected to any piece of hardware using GPIO to control it with buttons, run your own code and print debug messages to the LCD display. It can also be used as a regular USB to UART/SPI/I2C/etc adapter.
Flipper Zero has a built-in 1-Wire connector to read iButton contact keys. This old technology is still widely used around the world.
SPECIFICATIONS:
ARM Cortex-M4 32-bit 64 MHz (application processor)
ARM Cortex-M0+ 32 MHz (network processor)
Flash: 1024 KB
SRAM: 256 KB
LCD Monochrome
Resolution: 128x64 px
Interface: SPI
Diagonal Size: 1.4“
Battery: LiPo 2100 mA⋅h
Working time: 7 days approximately
Chip: TI CC1101
TX Power: 0 dBm max
Frequency bands (depends on your region):
315 MHz, 433 MHz, 868 MHz, 915 MHz
Supported cards:
ISO-14443A/B, NXP Mifare® Classic®, Ultralight®, DESFire® etc., FeliCa™, NFC Forum protocols
RDFID Frequency: 125 kHz
Modulation: AM, PSK, FSK
Supported cards:
EM400x, EM410x, EM420x, HIDProx, Indala
GPIO: 3.3 CMOS Level
Input 5V tolerant up to 20 mA per digital pin
Bluetooth: 5.0
Micro SD up to 64GB Read/Write speed: up to 5 Mbit/s
Dynamic frequency: 100-2500 Hz
Sound Output: 87 dB
TX/RX range: 800-950 nm
TX power: 300 mW
Operate modes: Reader/Writer/Emulator
Supported protocols: Dallas DS1990A, CYFRAL
USB 2.0 port, type C
Size: 100 x 40 x 25 mm
Weight: 102 grams
Set includes:
1x Flipper Zero
1x User manual
1x Charging cable
