Makita HR3011FCV with 30mm Hammer Drill Dust Collection System Blue

Drilling speed increased by approximately 70% (compared to Makita), with low vibration and comfort. 30mm, AC100V type. Drilling speed increased by approximately 70% (compared to Makita's previous model). Low vibration due to two counterweights for rotation and impact and anti-vibration handle. Vibration 3-axis composite value 9.5m/s2. Dust collection capacity 550mL. Compatible with long bits up to 265mm in total length (HR3011FCV only). Adopts a high performance filter and has a high collection rate of over 99.97% (the dust collection rate of the dust collection system is over 90%). When you turn the dial, dust falls from the filter and dust collection performance is restored. 3 modes can be switched by lever operation (rotation/rotation + blow/blow). A dust collection system is included as standard. If you remove it, it changes to a normal hammer drill. Power supply: single phase 100V, current: 12A, power consumption: 1,050W Drilling capacity: Concrete 30mm / Ironwork 13mm (using chuck sold separately) / Woodworking 32mm (using chuck sold separately) / Core bit 80mm / Diamond core bit 80mm. Number of rotations: 0 to 840 [rotations/min] / Number of blows: 0 to 4,500 [times/min] Total length: length 592mm x width 145mm x height 242mm (dimensions when the maximum length compatible bit is installed.). Mass: 5.2kg. Cord: 5m