FNB48P USB DC charger tester fast charging power test of voltmeter and ammeter

Specifications: FNB48USB tester is a USB voltage and current detector with high reliability and high security, and is also a fast charging trigger for mobile communication terminals. It has a 1.77-inch TFTLCD display and integrated USB-a, Micro USB and Type-C interfaces. Use external 16-bit ADC, PD protocol physical chip. It can be used to measure the power supply or power consumption of the product Such as USB interface, mobile phone charger, USB flash disk, etc.; It can be used to measure mobile phone charging power and mobile power input and output conditions; It can be used for fast charging protocol test of charger. be careful: 1 Do not connect the monitoring interface to a power supply exceeding 24V; 2 Do not connect the PC connection port to a power supply exceeding 16V; 30 can only work with a pair of monitoring interfaces (one input port and one output port) at the same time. When there is a pair of monitoring interfaces working, it is forbidden to connect to equipment on other monitoring interfaces. (In addition to the PC connection port, the PC port can be connected to the external power supply) 4 When using the fast charging trigger module, please do not connect it Equipment that cannot bear high voltage of any monitoring interface; 5 After using PD trigger/monitor/conversion/reading E-Marker cable function. Please turn the PD communication switch at the lower right corner back to the 0FF position; 6 When working at high power, the instrument temperature rises. Please be careful to avoid scalding 7 Do not charge the mobile phone after triggering the fast charging. The player will be damaged and the manufacturer will not be responsible. features: Standard version (space silver) without Bluetooth, Bluetooth version (blue) (optional) 3.0.1 Interface 1 input monitoring port: USB-A, 9-PIN male; 2 Input monitoring port: TYPE-C, 24-PIN female seat: 3 Input monitoring port: Micro-USB, 5-PIN female socket; 4 Output monitoring port: USB-A, 9-PIN female socket; 5 Output monitoring port: TYPE-C, 24-PIN female socket: 6 PC connection port: Micro USB, 5-PIN female socket. 3.0.2 Human-computer interaction 1 1.77-inch TFT-LCD screen; 2 Multi-function switch; 3 Touch switch. 3.0.3 Voltage and current I The highest six-digit display of voltage, current and power, with the highest resolution of 0.00001 (V/A/W) 2 Record the minimum value. Maximum and average values of voltage and current Power during operation: 2 10 sets of switchable capacity, power and time statistics; 3 1 set of voltage and current curve recording, supporting up to 9 hours 4 support low speed waveform (voltage, current, D+, D -) drawing, 2sps>100sps sampling rate: 5 Support high-speed ripple (voltage AC coupling) drawing up to 3.2Msps Sampling rate: 3.0.4 Quick charge trigger 1 QC2.0. QC3.0 trigger: 2 Huawei FCP, SCPtrigger; 3 AFC trigger; 4 PD2.0/3.0 trigger; 5 VOOC/WARP trigger; SuperVOOC trigger; The above protocols support automatic monitoring 8 MTK PE automatic detection; 9 Support QC2.0 ->PD2.0 protocol conversion; 10 Time-limited trigger can support up to 24 hours, and automatically close the trigger at that time 3.0.5 Wire identification level 1 Measure the internal resistance of the conductor through the differential pressure method; 2 E-Marker cable chip reading; 3 DASH cable data reading; Package includes: 1 * Tester