Luxury Electric Handlebar, 22 Models Without Throttle Core, Electric Vehicle Specific Model

About this item: 1.The right handlebar without throttle core has a larger inner diameter and is suitable for models where the throttle core is not suitable for disassembly 2.The product adopts a horizontally wound heating wire structure, which is much more complex than other structures on the market. However, the force is evenly distributed during rotation, providing excellent comfort. The heating power and electricity consumption are only half of similar products, and the heating effect is better. It is a truly efficient and energy-saving electric heating handle 3.The handle is made of high-temperature resistant nitrile rubber and molded in one go. It features an ultra-thin electric handle switch and a detachable lid that can be sealed and freely switched for use 4.The advanced electronic temperature control system does not consume power and can better protect the battery. The high-quality handle switch is even more exquisite than the original handle 5.The product wire adopts a silicone sheath, which can be used in extremely low environments. Silicone has excellent aging resistance and will not age over time (older wires do not have silicone protective covers)

Installation Instructions: 【1】 First, remove the left handle of the original car 【2】 Wet the inner hole with soapy water on the left hand, and do not twist it too much during installation. The power cord should leave enough wire for rotation 【3】 When installing the balance iron with the left handle, adjust the position of the balance iron to be slightly separated from the handle. When tightening the screws, do not squeeze the handle. If the left handle slides on the steel pipe during use, remove the balance iron and fix it with a few drops of 502 glue from the tail of the handle 【4】 The accelerator only needs to release the soft rubber, remove the soft rubber, and install the right handle. The oil wrench does not need to be removed 【5】 Wiring method: Connect the red wire to the positive pole of the power supply and the black wire to the negative pole of the power supply (note: do not connect it in reverse)

Attention: 【1】 When installing the left handle, do not twist it too much, as excessive twisting can cause the heating wire to shift; The handlebar only replaces the rubber handle part outside the original throttle ring, without replacing the throttle ring itself. For car enthusiasts who are not familiar with the car circuit or have poor manual skills, it is recommended to find a car dealership to install it 【2】 For vehicles with balance iron, please adjust the installation position of the balance iron and do not squeeze the handle when tightening the screws. The balance iron should be slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a gasket between the balance iron and the handle to separate them. Over pressing the handle can cause difficulty in turning the handle switch, and abnormal damage such as electric heating wire extrusion on the surface of the handle

Specifications: Product Name: Luxury Electric Hand Handle 22 models without cores or throttle cores Product Model: CS-095K1 Net weight of product: 220g Product gross weight: 244g Packaging method: Color box packaging Packaging size: 14.5x10.5x5.5cm Product Material: Nitrile Rubber Product Color: Black Handle length: Left handle: 125mm; Right handlebar: 127mm Handle diameter: Left handle diameter: 22mm; Right hand handle diameter: 25mm Input voltage: DC12V Product power: adjustable from 15W to 35W Working ring mirror temperature: -20 ° C -+50 ° C Handle type: sealable and passable electric handle Switch type: Multi level adjustable switch Applicable models: 12V motorcycles, electric vehicles